Your privacy, your choice

We use essential cookies to make sure the site can function. We also use optional cookies for advertising, personalisation of content, usage analysis, and social media.

By accepting optional cookies, you consent to the processing of your personal data - including transfers to third parties. Some third parties are outside of the European Economic Area, with varying standards of data protection.

See our privacy policy for more information on the use of your personal data.

for further information and to change your choices.
Skip to main content
Figure 6 | Journal of Orthopaedic Surgery and Research

Figure 6

From: Development of an in vitro three dimensional loading-measurement system for long bone fixation under multiple loading conditions: a technical description

Figure 6

Example of the 3D components of rotational displacement between ends of the 50 mm test segment versus applied torque (-50 to +50 Nm): A) intact control, B) osteotomy, and C) ostectomy. Note that the system resolution was capable of distinguishing total axial rotation of only 0.25, 0.45, and 2.0 degrees, respectively for these three models with notably less CrCa and LM bending rotation.

Back to article page

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X